Gestetner 2045 ユーザーズマニュアル
User Transmission
5
1
User Transmission
This function allows you to check
each user or department's transmis-
sion history. To use the function, you
need to program a user code (eight
digits max.) for each user or depart-
ment, to be entered before transmis-
sion. See the General Settings Guide.
each user or department's transmis-
sion history. To use the function, you
need to program a user code (eight
digits max.) for each user or depart-
ment, to be entered before transmis-
sion. See the General Settings Guide.
Note
❒ You can program codes of up to 8
digits for a maximum of 100 users
and/or departments. With the op-
tional account enhance module in-
stalled, you can program user
codes for a maximum of 500 users
and/or departments. See the Gen-
eral Settings Guide.
and/or departments. With the op-
tional account enhance module in-
stalled, you can program user
codes for a maximum of 500 users
and/or departments. See the Gen-
eral Settings Guide.
❒ You can enter user codes or names
into various lists or reports.
AAAA
Place the original, and then select
desired scan settings.
desired scan settings.
BBBB
Press [Transmission Mode].
CCCC
Press [User TX].
DDDD
Using the number keys enter a
user code (up to eight characters),
and then press [
user code (up to eight characters),
and then press [
#
#
#
#].
The programmed user name will
appear.
appear.
Note
❒ If you enter a wrong code, press
[Clear]
or the
{{{{Clear/Stop}}}} key be-
fore pressing [
#
#
#
#], and then try
again.
❒ To cancel the operation, press
[Cancel]
. The display returns to
that of step
EEEE
Press [OK].
The standby display appears.
The standby display appears.
Note
❒ To check the settings, press
[Transmission Mode]
.
FFFF
Specify a destination, and then
press the
press the
{{{{Start}}}} key.
Note
❒ You can cancel the transmission
setup for User Transmission.
See p.16 “Canceling a Transmis-
sion”.
See p.16 “Canceling a Transmis-
sion”.