Gestetner 2212 操作ガイド
Basics
16
1
Turning On the Power
AAAA
Press the operation switch. The
On indicator goes on.
The display panel will come on.
On indicator goes on.
The display panel will come on.
Note
❒ If the power is not turned on
when the operation switch is
pressed, check if the main pow-
er switch is on. If off, turn it on.
pressed, check if the main pow-
er switch is on. If off, turn it on.
❒ During the warm-up period
(less than 10 seconds), you can
use the Auto Start function.
use the Auto Start function.
Turning Off the Power
AAAA
Make sure that the exposure glass
c over or d oc umen t feed er is
closed.
c over or d oc umen t feed er is
closed.
BBBB
Press the operation switch. The
On indicator goes off.
On indicator goes off.
Note
❒ In the following cases, even if
you press the operation switch,
the indicator will not go off but
blink:
• When the exposure glass
the indicator will not go off but
blink:
• When the exposure glass
cover or document feeder is
open
open
• When communication is in
p r o g r e s s w i t h e x t e r n a l
equipment
equipment
• When the hard disk is oper-
ating
Turning Off the Main Power
AAAA
Make sure that the On indicator is
off.
off.
BBBB
Turn off the main power switch.
The Main Power indicator goes
off.
The Main Power indicator goes
off.
Important
❒ Do not turn off the main power
switch when the On indicator is
lit or blinking. This might dam-
age the hard disk or memory
and cause malfunctions.
lit or blinking. This might dam-
age the hard disk or memory
and cause malfunctions.
❒ Pull out the power plug after you
turn off the main power switch.
If you do not, the hard disk or
memory might be damaged. This
could cause malfunctions.
If you do not, the hard disk or
memory might be damaged. This
could cause malfunctions.
❒ Make sure 100% is displayed for
the remaining memory space in
facsimile mode before turning
off the main power or unplug-
ging the power cord. If the main
power switch is turned off or
the power cord is disconnected,
any documents stored in fax
memory will be lost after ap-
proximately one hour.
facsimile mode before turning
off the main power or unplug-
ging the power cord. If the main
power switch is turned off or
the power cord is disconnected,
any documents stored in fax
memory will be lost after ap-
proximately one hour.
⇒Chap-
ter 10, "When Power is Turned
off or Fails" in Advanced Fea-
tures manual of Fax Reference
off or Fails" in Advanced Fea-
tures manual of Fax Reference