Gestetner dsm616 ネットワークガイド

Appendix

114

Cannot find rprinter (<print server name>/ 
<printer number>)

Check the printer number registered in the 
print server.

Change IP address from DHCP Server.

The IP address changes when DHCP LEASE is 
renewed. To always assign the same IP ad-
dress, set a static IP address to the DHCP serv-
er.

child process exec error! (process name)

The network service failed to start. Turn the 
printer off and then on. If this does not work, 
contact your service or sales representatives.

Connected DHCP Server (<DHCP server ad-
dress>).

The IP address was successfully received from 
the DHCP server.

connection from <IP address>

Logged on from the host <IP address>

Could not attach to PServer <print server 
name>

When using a remote printer: Cannot connect 
to the print server. The print server is rejecting 
the connection for some reason. Check the 
print server settings.

Could not attach to FileServer <error code>

When using a remote printer: Cannot connect 
to the file server. The file server is rejecting the 
connection for some reason. Check the file 
server settings.

Current Interface Speed:xxxMbps

The speed of the network (10 Mbps or 100 Mb-
ps)

Current IP address <current IP address>

The IP address <current IP address> was re-
ceived from the DHCP server.

Current IPX address <IPX address> 

The current IPX address

DHCP lease time expired.

DHCP lease time has expired. The printer tries 
to locate the DHCP server again. The IP ad-
dress used till now becomes invalid.

DHCP server not found.

The DHCP server cannot be found. Make sure 
the DHCP server is running on the network.

dhcpcd start.

A dhcpcd (DHCP client server) has started.

Duplicate IP=<IP address>(from <MAC ad-
dress>).

The same IP address is used. Every IP address 
must be unique. Check the address of the de-
vice indicated in <MAC address>.

Established SPX Connection with PServer,

(RPSocket=<socket number>, connID =<con-
nection ID>)

(In remote printer mode) A connection with 
the print server has been established.

exiting

lpd service has ended and the system is clos-
ing down.

Exit pserver

(In print server mode) Exits the print server 
because necessary print server settings have 
not been made.