Gestetner dsm651 ネットワークガイド

Precautions

141

You should not configure form feed
on NetWare. Form feed is controlled
by the printer driver on Windows. If
NetWare form feed is configured, the
printer might not work properly. If
you  want to change form feed set-
tings, always configure them using
Windows.
• Under Windows 95/98/Me, clear

the [Form feed] check box on the
[Printer Settings]

 tab in the printer

properties dialog box.

• Under Windows 2000/XP and

Windows Server 2003, clear the
[Form feed]

 check box on the [Net-

 tab in the printer

properties dialog box.

• Under Windows NT 4.0, clear the

 check box on the [Net-

 tab in the printer

properties dialog box.

You should not configure a banner
page on NetWare. If you want to
change the banner page setting, al-
ways configure it using Windows.
• Under Windows 95/98/Me, clear

the [Enable banner] check box on the
[Printer Settings]

 tab in the printer

properties dialog box.

• Under Windows 2000/XP and

Windows Server 2003, clear the
[Enable banner]

 check box on the

 tab in the printer

properties dialog box.

• Under Windows NT 4.0, clear the

 check box on the

 tab in the printer

properties dialog box.

After resetting the remote printer, the
connection from the print server will
be cut off for about 30-40 seconds be-
fore re-connecting. Depending on the
NetWare specification, print jobs may
be accepted, but they will not be
printed during this interval.
When using the machine as a remote
printer, wait about two minutes after
resetting before attempting to print.