Gestetner dsm651 ネットワークガイド

Monitoring and Configuring the Printer

❖

❖ Interface configuration

msh> rendezvous linklocal
“interface_name”

• If many types of interface are in-

stalled, configure the interface
that communicates with linklo-
cal address.

• If you do not specify an inter-

face, the Ethernet interface is
automatically selected.

• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

route

Use the “route” command to control
the routing table.

❖

❖ All route information display

msh> route

❖

❖ Specified route information display

msh> route “destination”

• Specify the IP address to desti-

nation.

❖

❖ Enabling/disabling Specified Destina-

tion

msh> route active {host|
net} “destination” {on |
off}

• You can turn the specified desti-

nation on or off. Host becomes
the default setting.

❖

❖ Adding Routing Table

msh> route add {host|net}
“destination” “gateway”

• Adds a host or network route to

“destination”, and a gateway ad-
dress to “gateway” in the table.

• Specify the IP address to desti-

nation and gateway.

• Host becomes the default set-

ting.

❖

❖ Setting Default Gateway

ms h> ro ute ad d def aul t
“gateway”

❖

❖ Deleting Specified destination from

Routing Table

msh> route delete {host|
net} “destination”

• Host becomes the default set-

ting.

• IP address of destination can be

specified.

❖

❖ Route Flush

msh> route flush

Note

❒ The maximum number of routing

tables is 16.

❒ Set a gateway address when com-

municating with devices on an ex-
ternal network.

❒ The same gateway address is shared

by all interfaces.

Interface

Interface configured

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b interface