Arecont Vision av10005 ユーザーガイド
ARECONT VISION USER MANUAL
10
Arecont Vision 425 E Colorado St, 7
th
Floor Glendale, CA 91205 Revised 5/9/2010
www.arecontvision.com
www.arecontvision.com
www.arecontvision.com
www.arecontvision.com
•
Optionally, a DC auto-iris connector. AV3130, AV3135, AVXX55, AVXX10 and AV10005 do not
support auto-iris and does not have this connector.
support auto-iris and does not have this connector.
•
Auxiliary input and output connector
Power
Power
Power
Power
Power for all Arecont Vision cameras can be supplied as follows:
•
Via LAN connector according to IEEE 802.3af (PoE). For a list of recommended PoE switches, see
“Network PoE Switch or Router PoE”
“Network PoE Switch or Router PoE”
on page 7.
•
Via an auxiliary power jack.
Power consumption will vary depending on the mode of operation. The maximum power consumption takes
place when the camera is streaming video at a maximum frame rate and at full resolution.
The
place when the camera is streaming video at a maximum frame rate and at full resolution.
The
The
The
The maximum power consumption is
maximum power consumption is
maximum power consumption is
maximum power consumption is::::
•
AV1300, AV1310, AV2100, AV2110, AV3100, AV3110, AV3130, AV5100, AV5110 -- 3 W
•
AV1305, AV2105, AV3105 – 4.5 W
•
AV1355, AV2155, AV3155, AV3135, AV5105, AV5155 -- 5 W
•
AV8180, AV8360 – 7.8 W
•
AV8185, AV8365 – 9.0 W
•
AV10005 in 1080p mode - 5.1 W
•
AV10005 in 10 Megapixel mode – 4.9 W
Housing and Mounting
Housing and Mounting
Housing and Mounting
Housing and Mounting
All Arecont Vision camera models feature a durable aluminum housing that minimizes fire hazards. The
housing is not hermetically sealed. The ambient temperature should be maintained between 0ºC and 50ºC
(32ºF to 122ºF). Cameras used outdoors require appropriate protective enclosures.
housing is not hermetically sealed. The ambient temperature should be maintained between 0ºC and 50ºC
(32ºF to 122ºF). Cameras used outdoors require appropriate protective enclosures.
Cameras are mounted using a ¼” x 20 threaded hole on the bottom of the housing. When mounting the
camera, make sure that the mounting screw is no longer than ¼”. The cameras are to be installed according
to the applicable code and regulations. The mounting hardware should be able to support 1 lb camera
(except AV8360 that weights 4lbs).
Model AV3130 and AV3135 require a 3” enclosure window; all other cameras can use most any outdoor
housing.
camera, make sure that the mounting screw is no longer than ¼”. The cameras are to be installed according
to the applicable code and regulations. The mounting hardware should be able to support 1 lb camera
(except AV8360 that weights 4lbs).
Model AV3130 and AV3135 require a 3” enclosure window; all other cameras can use most any outdoor
housing.
Network Cabling
Network Cabling
Network Cabling
Network Cabling
Category 5e cabling or better is recommended. All network cabling must be installed according to applicable
codes and regulations.
codes and regulations.