Lanzar sts65bt ユーザーガイド

7

8.  Reconnect the cable to the vehicle

battery's negative (-) terminal. Then
replace the outer trim ring and install
the unit's front panel. (see the steps
of “using the detachable front panel”).

Removing the unit
1. Make sure the ignition is turned off,

and then disconnect the cable from
the vehicle battery's negative (-)
terminal.

2. Remove the metal strap attached the

back of the unit (if attached).

3. Lift the top of the outer trim ring then

pull it out to remove it.

4. Insert both of the supplied keys into

the slots at the middle left and right
sides of the unit, then pull the unit out
of the dashboard.