ONKYO DR-UN7 取り扱いマニュアル
31
Playing Discs
The basic playback controls for playing DVD, CD, SACD, Video CD and MP3/WMA discs are covered here. Further
functions are detailed in the next chapter.
For details on playing JPEG picture discs, see “Viewing a JPEG Slideshow” on page 41.
functions are detailed in the next chapter.
For details on playing JPEG picture discs, see “Viewing a JPEG Slideshow” on page 41.
Important:
Throughout this manual, the term “DVD” means DVD-Video, DVD-Audio and DVD-R/ RW. If a function is specific
to a particular kind of DVD disc, it is specified.
Throughout this manual, the term “DVD” means DVD-Video, DVD-Audio and DVD-R/ RW. If a function is specific
to a particular kind of DVD disc, it is specified.
Note:
• You may find with some DVD discs that some play-
• You may find with some DVD discs that some play-
back controls don’t work in certain parts of the disc.
This is not a malfunction.
This is not a malfunction.
With the DVD-Video, Video CD and Audio CD, when
you stop playback of a disc, RESUME is shown in the
display indicating that you can resume playback again
from that point.
If the disc tray is not opened, the next time you start
playback the display shows RESUME and playback
resumes from the resume point. (If you want to clear the
resume point, press
you stop playback of a disc, RESUME is shown in the
display indicating that you can resume playback again
from that point.
If the disc tray is not opened, the next time you start
playback the display shows RESUME and playback
resumes from the resume point. (If you want to clear the
resume point, press
(stop) while RESUME is dis-
played.)
If you take a VCD out of the player after stopping play-
back, the last play position is stored in memory. If the
next disc you load is the same one, the display shows
LAST MEM and playback will resume. For DVD-Video
discs (except VR mode DVD-RW), the player stores the
play position of the last five discs. When one of these
discs is next loaded, you can resume playback.
If you take a VCD out of the player after stopping play-
back, the last play position is stored in memory. If the
next disc you load is the same one, the display shows
LAST MEM and playback will resume. For DVD-Video
discs (except VR mode DVD-RW), the player stores the
play position of the last five discs. When one of these
discs is next loaded, you can resume playback.
Notes:
• The Last Memory function doesn’t work with VR for-
• The Last Memory function doesn’t work with VR for-
mat DVD-RW, DVD-Audio or SACD discs.
• If you don’t need the Last Memory function when you
stop a disc, you can press
OPEN/CLOSE to stop
playback and open the disc tray.
STANDBY/ON
STANDBY/
ON
ON
1
If the player isn’t already on, press
STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD,
also turn on your TV and make sure that
it is set to the correct video input.
STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD,
also turn on your TV and make sure that
it is set to the correct video input.
2
Press
OPEN/CLOSE to open
the disc tray.
3
Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc
(if you’re loading a double-sided DVD
disc, load it with the side you want to
play face down).
Load a disc with the label side facing up,
using the disc tray guide to align the disc
(if you’re loading a double-sided DVD
disc, load it with the side you want to
play face down).
4
Press
(play) to start playback.
If you’re playing a DVD or Video CD, an
on-screen menu may appear. See “DVD
Disc Menus” on page 32 and “Video CD
PBC menus” on page 33 for more on
how to navigate these.
• If you’re playing an MP3/WMA disc,
on-screen menu may appear. See “DVD
Disc Menus” on page 32 and “Video CD
PBC menus” on page 33 for more on
how to navigate these.
• If you’re playing an MP3/WMA disc,
it may take a few seconds before play-
back starts.
back starts.
Remote
controller
Resume and Last Memory