ONKYO DR-UN7 取り扱いマニュアル

Setting the Clock

You can select either the 12-hour or 24-hour display. (This section explains how to set the time based on the 24-
hour display.)

To cancel the clock setting

Press EDIT/NO/CLEAR on the DVD receiver.

To check the time and the day of the week, press
CLOCK on the remote controller.
The clock appears for eight seconds in Standby mode.

Press DISPLAY while the current time is indicated on
the display.

First turn on the power to the unit, then press and hold
down the STANDBY/ON button on the unit for more
than two seconds.
Displaying the current time in Standby mode consumes
more power than not displaying the current time.

Using the remote controller

EDIT/
NO/
CLEAR

STANDBY/ON

DISPLAY

2-6

Display

3, 5

2, 4, 6

CLOCK

DISPLAY

Press TIMER repeatedly until
“Clock” appears in the display.

Press MULTI JOG.

You can now set the day of the week.

Turn MULTI JOG to select the cur-
rent day of the week.

Press MULTI JOG to confirm the
setting.

You can now set the time.

Turn MULTI JOG to set the current
time.
You can also use the number buttons on
the remote controller.

To switch between the am and pm indica-
tors, press the >10 button on the remote
controller.

SUN - Sunday
MON - Monday
TUE - Tuesday
WED - Wednesday

THU - Thursday
FRI - Friday
SAT - Saturday

Press MULTI JOG to start the
clock.
You can also use the ENTER button on
the remote controller.
It can be helpful to synchronize with an
accurate time source.

The clock starts operating and a dot indi-
cating seconds starts to flash.

Checking the Time and the Day of the
Week

To Switch between the 12-hour and
24-hour Displays

Turning the Current Time Display On
or Off while the Unit is in Standby
Mode