ONKYO TX-NR900 取り扱いマニュアル
31
Adjusting the main volume adjusts the volume level of all the
speakers connected to the TX-NR900/900E together. If
headphones are connected, this also adjusts the volume heard
from the headphone speakers. To adjust the volume, either press
the VOL
speakers connected to the TX-NR900/900E together. If
headphones are connected, this also adjusts the volume heard
from the headphone speakers. To adjust the volume, either press
the VOL
buttons on the remote controller or turn the
MASTER VOLUME dial. To increase the volume, turn the dial
clockwise; to decrease the volume, turn the dial
counterclockwise. The volume can be set to 0 to 100 (or –
clockwise; to decrease the volume, turn the dial
counterclockwise. The volume can be set to 0 to 100 (or –
∞, –81
to +18 dB).
To change the display of the input source from
TAPE to MD
TAPE to MD
If you connected an MD recorder to the TAPE jack on the TX-
NR900/900E, you can have “MD” appear when the TAPE source
button is pressed.
NR900/900E, you can have “MD” appear when the TAPE source
button is pressed.
Changing the display:
Press and hold down the TAPE source button until the display
changes from TAPE to MD (approx. 3 seconds).
changes from TAPE to MD (approx. 3 seconds).
To return the display to its original setting, perform the same
procedure.
procedure.
Though the TX-NR900/900E is often used to listen to the radio, it
does not show you its true ability until it is used to play music or
watch videos, DVDs, and the like. The TX-NR900/900E has the
latest and most state-of-the-art features to play back today’s
technologies with the utmost in fidelity and power. From a two-
speaker system to a seven-speaker system, you are assured a sound
space that you can always enjoy.
To ensure the proper sound space, you must first perform the
speaker setup settings. These settings allow you to set the type of
speakers you are using, the distance that they are located from the
listening position, and the individual speaker volumes. For more
details, see Speaker Setup Sub-menu of the Setup Menu on page 48.
does not show you its true ability until it is used to play music or
watch videos, DVDs, and the like. The TX-NR900/900E has the
latest and most state-of-the-art features to play back today’s
technologies with the utmost in fidelity and power. From a two-
speaker system to a seven-speaker system, you are assured a sound
space that you can always enjoy.
To ensure the proper sound space, you must first perform the
speaker setup settings. These settings allow you to set the type of
speakers you are using, the distance that they are located from the
listening position, and the individual speaker volumes. For more
details, see Speaker Setup Sub-menu of the Setup Menu on page 48.
Basic operation
If you want to perform these operations using the remote controller,
first press the RCVR button.
first press the RCVR button.
1. Press the input source button (or INPUT SELECTOR
button on the remote controller) that corresponds to
the source to which you want to listen.
the source to which you want to listen.
2. Turn on the corresponding component and play the
media.
3. Adjust the volume.
STANDBY/ON
STANDBY
DVD
ZONE
2 (
)
GRN
REC (
)
RED
AUDIO
SELECTOR
PURE AUDIO
UPSAMPLING
OFF
ON
POWER
MASTER VOLUME
TUNER
PHONO
NET AUDIO
C D
TAPE
VIDEO
3
VIDEO
5
VIDEO
4
VIDEO
2
VIDEO
1
VCR
2
VCR
1
DISPL AY
STEREO SURROUND
THX
DSP
REC OUT
ZONE
2
OFF
RT/ PTY/ TP MEMORY
FM MODE
SETUP
ENTER
RETURN
S VIDEO
AUDIO
VIDEO
L
R
DIGITAL
VIDEO
5 INPUT
PRESET
TUNING
CLEAR
ZONE
2 LEVEL
PHONES
MASTER VOLUME
RCVR
TAPE
VOL
/
Enjoying music or videos with the TX-NR900/900E
INPUT
SELECTOR
buttons
SELECTOR
buttons
Input source buttons
TX-NR900/900E
Remote controller
DVD
TUNER
PHONO
NET AUDIO
C D
TAPE
VIDEO
3
VIDEO
5
VIDEO
4
VIDEO
2
VIDEO
1
TAPE
TX-NR900/900E
Remote controller
MASTER VOLUME