TallyGenicom 3860 クイック設定ガイド
3860/80 Quick Reference Guide
21
Rear View
Feed Pins
Feed Holes
Paper Scale
Move the home position tractor as necessary to align the paper.
If necessary, position the home-position tractor so that the edge of the
paper aligns with the “0” on the paper scale. Pull the home-position
tractor locking lever forward and adjust the tractor postion.
paper aligns with the “0” on the paper scale. Pull the home-position
tractor locking lever forward and adjust the tractor postion.
Move the far tractor as necessary to fit your paper.
If necessary, pull the far tractor locking lever forward and adjust the far
tractor’s position so that it matches the width of the paper.
tractor’s position so that it matches the width of the paper.
Put paper in the far tractor and close the door.
Make sure the leading edge of the paper is parallel with the tractor
shafts. Sprocket-feed holes in the paper should engage three to five of
the pins of the tractor belt. Make sure that the same number of pins are
engaged on both tractors. For the rear path, load the paper face down.
shafts. Sprocket-feed holes in the paper should engage three to five of
the pins of the tractor belt. Make sure that the same number of pins are
engaged on both tractors. For the rear path, load the paper face down.
Paper Scale
Rear View
Locking
Lever
Home-Position
Tractor