Lexmark X560N ユーザーズマニュアル

None

Min

Middle

Max

Specifies the volume for the incoming faxes

Note: Max is the factory default setting.

PSTN

PBX

Specifies the line type

Note: PSTN is the factory default setting.

PB

DP(10PPS)

DP(20PPS)

Specifies the dialing type

Note: PB is the factory default setting.

Off

On

When Junk Fax Filter is set to On, incoming faxes are accepted
only from numbers registered in the Address Book.

Note: Off is the factory default setting.

Off

On

Specifies whether to receive a fax by pressing the remote
receive code on the external telephone after picking up the
handset of the telephone. When Remote Receive is set to On,
a fax can be received by pressing the remote receive code on
the external telephone.

Note: Off is the factory default setting.

00–99

Specifies the tone in two digits when Remote Receive is set to
On

Note: 00 is the factory default setting.

Off

On

Specifies whether to use duplex printing when receiving a fax

Off is the factory default setting.

This option is available only when the printer has a duplex
unit installed.

Off

On

When Send Header is set to On, the sender record is printed at
the head of the fax.

Note: On is the factory default setting.

<input company name>

Specifies the sender name to be recorded in the sender report

<input fax number>

Specifies your telephone number, which is printed at the top
of each page sent from your printer

<input device name>

Specifies your name or your company name, which is printed
on the report sheet

Understanding printer menus