Lexmark X560N ユーザーズマニュアル
Faxing
Automatic Document Feeder (ADF)
Scanner glass
Use the Automatic Document Feeder (ADF) for
multiple-page A4-, letter-, or legal-size documents.
multiple-page A4-, letter-, or legal-size documents.
Use the scanner glass for single pages, small items (such
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
Sending a fax
Note: New Zealand telecom users: If a charge for local calls is unacceptable, do not use the “Dial” button for local
calls. Only the seven digits of the local number should be dialed from your telephone. Do not dial the area code digit
or the “0” prefix.
calls. Only the seven digits of the local number should be dialed from your telephone. Do not dial the area code digit
or the “0” prefix.
Sending a fax using the ADF
1
Make sure the printer is on and is connected to a working phone line.
2
Load an original document faceup, short edge first into the ADF.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
3
Adjust the paper guides.
4
From the printer control panel, press Fax.
5
Press
or
repeatedly until Fax to appears, and then press OK.
6
Press
or
repeatedly to select the type of recipient, and then press OK.
7
Press Start
to start the fax job.
Sending a fax using the scanner glass
1
Make sure the printer is on and is connected to a working phone line.
2
Place the first page facedown on the scanner glass.
3
Press
or
repeatedly until Fax to appears, and then press OK.
4
Press
or
repeatedly to select the type of recipient, and then press OK.
Faxing
86