Lexmark X560N ユーザーズマニュアル

To cancel a print job, press Stop 

 at any time.

TEL Mode

Automatic fax reception is turned off. You can receive a fax by picking up
the handset of the external phone and then pressing the remote receive
code, or by setting On Hook to On (so you can hear voice or fax tones from
the remote machine) and then pressing Start.

FAX Mode

A fax is automatically received.

TEL/FAX Mode

When the printer receives an incoming fax, the external telephone rings for
the time specified by Auto Ans. TEL/FAX, and then the printer automatically
receives the fax. If incoming data is not a fax, the printer sounds a beep over
the internal speaker.

Ans/FAX Mode

The printer can share one telephone line with an answering machine. In this
mode, the printer monitors the fax signal and picks up the line if there are
fax tones. If the phone communication in your country or region is serial,
this mode is not available.

DRPD Mode

Before using the Distinctive Ring Pattern Detection (DRPD) option,
distinctive ring service must be installed on your telephone line by the
telephone company. After the telephone company has provided a separate
number for faxing with a distinctive ring pattern, configure the fax setup to
monitor for that specific ring pattern.

Make sure the printer is on and Select Function appears.

From the printer control panel, press System.

Press 

 or 

 repeatedly until Admin Menu appears, and then press OK.

Press 

 or 

 repeatedly until Fax Settings appears, and then press OK.

Press 

 or 

 repeatedly until Ans Select appears, and then press OK.

Press 

 or 

 repeatedly to select the fax mode you want, and then press OK.

Press 

 repeatedly until Select Function appears.

Faxing