Bluetrek e2 ユーザーガイド

PAGE 5 / 6 

*Mobile phone with voice recognition 
. Make sure the voice recognition function on your mobile is activated and your voice   
  tags have been recorded with the phone. To enter these, please refer to your phone’s  

manual 

. When there is no incoming or active call, press once on the TALK button  
. Wait for the audio signal sent by the mobile phone (generally a short tone). 
. Speak the name of person you wish to call. 
 
Mobile without voice recognition 
. Make sure both the headset and the mobile phone are ON and in stand-by mode. 
. Dial the number on the phone keypad, after approximately 2 seconds the audio 

connection will be established. 

 
*This function may not be available on some phones, please refer to the trouble 
shooting frequent asked questions in our website: www.bluetrek.com. to find out more.   
 

When the headset rings, press once on the TALK button to take the call. 
 
 

Press once on the TALK button to end an active call. 
 

To increase the volume during an active call, press the “VOL+” button on the headset. 
 
To decrease the volume during an active call, press the “VOL-“ button on the headset.  
 

 
To mute the microphone during an active call 
During an active call, press and hold the VOL+ button for approximately 2 seconds. A 
periodic tone can be heard in the speaker when the microphone is muted. 

To end the mute function 
When the microphone is muted quickly press the VOL+ button on the BLUETREK

®

 E2. 

The periodic tone will end. 
 
 

During an active call, press the TALK button for about 2 seconds. 
(This function only works in the Hands-Free Profile.) 
 
In the Headset profile, you can simply turn off your headset.