Blaupunkt HEIDELBERG CD50 操作ガイド

24

In addition to the CD changer it is also
possible to connect another external au-
dio source to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
If you have not connected a CD chang-
er, it is possible to connect two external
audio sources.
You must activate the AUX output in the
menu.
If you would like to connect another ex-
ternal audio source, you will require an
adapter cable. This adapter cable can
be ordered from any authorized Blau-
punkt dealer.

Switching the AUX output on/off
➮

Press MENU 

8

.

“MENU” will appear in the display.

➮

Press 

 

:

 repeatedly until “AUX-

IN-1 OFF” or “AUX-IN-1 ON” ap-
pears in the display.

In place of the “1”, there is a “2” for the
second AUX input. If you have connect-
ed a CD changer, then only AUX “2” can
be selected.

➮

Press   or   

:

 to switch AUX on

or off.

➮

Once you have completed your
selections, press MENU 

8

 or

;

.

Note:
If the AUX input has been switched ON,
you can select it by pressing CD•C 

@

.

Amplifier

Output power:

4 x 25 watts RMS
acc. to DIN 45 324
at 14.4 V
4 x 40 watts max.
power

Tuner

Wavebands:
FM:

87.5 - 107.9 MHz

AM:

530 - 1710 kHz

FM Mono sensitivity:

7.8 dBf

FM frequency response:

30 - 15000 Hz

CD player

Signal-to-noise ratio:

96 dB

Frequency response:

20 - 20000 Hz

Preamp Out

4 channels:

4 V

Subject to technical modification!