Boundless adds 4000 ユーザーガイド

34     Setup

 

 

Host/Printer:  [EIA/Aux, EIA/Para, EIA/None, Aux/EIA, Aux/Para, Aux/None, 

None/EIA, None/Aux, None/Para, None/None]   

The first part of the selection indicates the host (either the EIA port or the AUX port) 
and the second part of the selection indicates the printer port (if a serial printer is used, 
either the EIA or Aux port can be used to connect to the printer,  but if a parallel 
printer is being used, the PAR port should be used).  The active session “drives” the 
printer.  EIA/Para is the default for session 1, and Aux/None is the default for session 
2. 

 

 

This chapter lists all possible parameters for each menu, and all possible choices for 
each parameter.  Depending on the emulation selected, and the key mode (ASCII or 
ScanCode), Setup will only present the valid set of parameters and choices in each 
menu. 

 

Emulation: 

 Select the “personality” of t he terminal.  See the Quick menu earlier in 

this chapter. 

Choose whether the terminal can respond to commands beyond the 

limitations of the current emulation.  See the Quick menu earlier in this chapter.  

Auto Wrap:  [On, Off]   

Select whether the cursor drops to the next line when it reaches the right margin or 
continues to display characters at the right margin.  In ANSI emulations, the default is 

. 

Auto Font Load:   [On, Off]   

Select whether the four font banks (0-3) should automatically be loaded when screen 
size or the emulation is changed. 

Auto Page:  [On, Off]   

When the cursor is moved off the page using a command that includes scroll and Auto 
Page mode is 

, the screen displays the new page.  These pages are numbered from 0 to 

a maximum of 9.  When 

, Auto Page will track the page even if Auto Scroll is 

.  

The up-arrow key does not have a scroll command embedded, so it cannot be used to 
view the previous page even when Auto Page is 

.