Samsung d60 ユーザーガイド

ページ / 98
Caution
Contents
Ś3ś
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in a minor or moderate injury.
ƅ Leaking, overheating, or damaged battery could result in fire or injury.
ҟUse battery with the correct specification for the camera.
ҟDo not short circuit, heat or dispose of battery in fire.
ҟDo not insert the battery with the polarities reversed. 
ƅ Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
ƅ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
ƅ Do not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the
wall socket. Then make sure that any connector cords or cables to other devices
are disconnected before moving the camera. Failure to do so may damage the
cords or cables and cause a fire or electric shock.
ƅ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
ƅ Avoid obstructing the lens or the flash when you capture an image.
ƅ Credit cards may be demagnetized if left near a camera case. Avoid leaving
magnetic strip cards near the case.
ƅ Using an AC adapter that doesn't match with the camera specification may
cause camera malfunction. We recommend supplied battery or exclusive
rechargeable battery. 
ż
Available AC adapter :
Voltage: 3.3V, Amprer: 2.0A, Diameter (
ѡ): 2.35
ƅ After turning on the camera, Check whether the battery type and the camera
setting set on the [Setup] > [Battery Type] menu (p. 37) are same or not.
READY
ƀSystem chart ŊŊŊŊŊŊŊŊŊ5
ƀIdentification of features ŊŊŊŊŊ6
ƅFront & TopŊŊŊŊŊŊŊŊŊŊ6
ƅBack & Bottom ŊŊŊŊŊŊŊŊ7
ƅBottom/ 5-function button ŊŊŊŊ8
ƅSelf-timer lamp ŊŊŊŊŊŊŊŊ8
ƅCamera Status Lamp ŊŊŊŊŊ8
ƅMode icon ŊŊŊŊŊŊŊŊŊŊ9
ƀConnecting to a Power Source ŊŊ9
ƀInserting the memory card ŊŊŊ10
ƀInstructions on how to use the
memory card
ŊŊŊŊŊŊŊŊŊ11
ƀWhen Using the Camera for the 
First Time
ŊŊŊŊŊŊŊŊŊŊ13
ƀLCD monitor indicator ŊŊŊŊŊ14
ƀStarting the recording mode ŊŊ15
ƅHow to use the AUTO mode ŊŊ15
ƅHow to use the PROGRAM modeŊ15
ƅHow to use the ASR (Advanced
Shake Reduction) mode
ŊŊŊŊ15
ƅWise Shot ŊŊŊŊŊŊŊŊŊŊ16
ƅHow to use the MANUAL modeŊ17
ƅHow to use the SCENE mode Ŋ17
ƅPortrait, Night scene mode ŊŊŊ18
ƅHow to use the MOVIE CLIP mode Ŋ18
ƅRecording the movie clip without
voice
ŊŊŊŊŊŊŊŊŊŊŊŊ18
ƅPausing while recording a movie 
clip (Successive Recording)
ŊŊ19
ƅUsing Successive Recording  Ŋ19
ƅHow to use the VOICE
RECORDING mode
ŊŊŊŊŊ19
ƀThings to Watch Out for When
Taking Pictures
ŊŊŊŊŊŊŊŊ20 
ƀUsing the camera buttons to set 
the camera
ŊŊŊŊŊŊŊŊŊ21
ƅPOWER button ŊŊŊŊŊŊŊ21
ƅShutter button ŊŊŊŊŊŊŊŊ21
ƅZOOM W / T buttonŊŊŊŊŊŊ21
ƅVoice recording / Voice memo / 
UP button
ŊŊŊŊŊŊŊŊŊŊ23   
ƅMacro / Down button ŊŊŊŊŊ23
ƅFocus lock ŊŊŊŊŊŊŊŊŊ24
ƅFlash / Left button ŊŊŊŊŊŊ25
ƅSelf-timer / Right button ŊŊŊŊ27
ƅMENU / OK button ŊŊŊŊŊŊ27
ƀUsing the LCD monitor to set the
camera settings
ŊŊŊŊŊŊŊŊ28
ƀHow to use the menu ŊŊŊŊŊ30
ƀRecording ŊŊŊŊŊŊŊŊŊŊ30
RECORDING
SETUP