Samsung cht-250 取り扱いマニュアル
11
GB
Connecting DVD-VCR to the TV using the Coaxial Cable
Connecting DVD-VCR to the TV using the RCA Cable
To receive television programmes a signal must be received from
one of the following sources:
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
☛
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
are switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75
Ω
coaxial socket marked FROM
ANT. on the rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the TO TV socket on your
DVD-VCR.
DVD-VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
previously used for the aerial on the television.
5
To obtain better pictures and sound quality on your television,
you can also connect your DVD-VCR to the television via the
RCA cable (see section below) if your television is equipped
with this type of connection.
you can also connect your DVD-VCR to the television via the
RCA cable (see section below) if your television is equipped
with this type of connection.
ou can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on
the television. You thus:
the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
◆ Simplify the setting up procedure of your DVD-VCR
☛
◆
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆
Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
RADIO ANT.
AM
FM
75
COAXIAL
75
COAXIAL
LINE
IN
LINE
OUT
OUT
V
DVD & VCR
IN
(FROM ANT.)
OUT
(TO TV)
RF
RADIO ANT.
AM
FM
75
COAXIAL
75
COAXIAL
LINE
IN
LINE
OUT
OUT
V
DVD & VCR
R
L
IN
(FROM ANT.)
OUT
(TO TV)
RF
3
2
TV
4
RADIO ANT.
AM
FM
75
COAXIAL
75
COAXIAL
AUDIO
LINE
IN
LINE
OUT
OUT
VIDEO
DVD & VCR
R
L
IN
(FROM ANT.)
OUT
(TO TV)
RF
Aerial
RF coaxial cable
2
3
TV