Samsung cht-250 取り扱いマニュアル
50
GB
Setting Up the Display Options
DVD
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
,
❷
buttons, then OK or
❿
button.
3
Select Display Setup using
,
❷
buttons, then press the OK
or
❿
button.
4
Use the
,
❷
buttons to select the desired item. Then press the
OK or
❿
button.
• TV Aspect
Depending on the type of television you have, you may want
to adjust the screen setting (aspect ratio).
to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see
the central portion of the 16:9 screen. (Extreme left and right
side of movie picture will be cut off.)
Select this for conventional size TVs when you want to see
the central portion of the 16:9 screen. (Extreme left and right
side of movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
You can view the full 16:9 picture on your widescreen TV.
• Black Level
Adjusts the brightness of the screen.(On/Off)
• NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance.
If this is not the case, you can choose to leave “ PAL 60Hz”
as is.
as is.
• DVD Output
Component : Sends COMPONENT signal (Y, Pb, Pr) to
the component video out JACK.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
Video : - Sends COMPOSITE VIDEO signal to Line out JACK.
- Sends COMPONENT INTERLACE signal from
COMPONENT JACK.
NTSC Disc Output
DVD Out
TV Aspect
Black Level
Display Setup
: 4:3 L-Box
: PAL 60Hz
: Component
Setup
Setup
Display Setup
Setup :
S-Video Connections (for DVD)
DVD
The S-Video is only for the DVD player. The tuner and VCR will
still be viewed through the RF or line inputs.
You must follow the “DVD Out” instructions above to activate
your alternative (S-Video) video selection. If your television is
equipped with S-Video input, you can enjoy superior video
quality when watching DVDs with your DVD-VCR.
still be viewed through the RF or line inputs.
You must follow the “DVD Out” instructions above to activate
your alternative (S-Video) video selection. If your television is
equipped with S-Video input, you can enjoy superior video
quality when watching DVDs with your DVD-VCR.
1
Connect S-Video Out to TV
Connect an S-Video cable from the S-Video Out on the back
panel of the DVD-VCR to the S-Video Input on your television.
panel of the DVD-VCR to the S-Video Input on your television.
SPEAKERS
FRONT R FRONT L WOOFER
SURROUND R SURROUND L CENTER
DVD Only
COMPONENT VIDEO OUT
S-VIDEO OUT
To S-Video Input on Your TV
1