Samsung dvd-hr735 取り扱いマニュアル

English - 23

• Using the DVI Adapter(not supplied) Cable,

connect the HDMI OUT jack on the rear of the
HDD & DVD RECORDER to the DVI IN jack of
your TV.

• Using the audio cables, connect the AUDIO 

(red and white) OUT jacks on the rear of the HDD
& DVD RECORDER to the AUDIO (red and white)
IN jacks of your TV. Turn on the HDD & DVD
RECORDER and TV.

• Press the input selector on your TV remote control

until the DVI signal from the HDD & DVD
RECORDER appears on your TV screen.

If your TV has a HDMI/DVI input, connect HDMI/DVI
Adapter cable to a TV. You will enjoy the best quality
images and sounds.

• Case 1 : Connecting to a TV with HDMI Jack
• Case 2 : Connecting to a TV with DVI Jack

• Using the HDMI cable connect the HDMI OUT 

jack on the rear of the HDD & DVD RECORDER to 
the HDMI IN jack of your TV.

• Press the input selector on your TV remote control 

until the HDMI signal from the HDD & DVD
RECORDER appears on your TV screen.

■ 

To use HDMI cable, make the Audio/Video
connection before plugging in the power cord
or after finishing the “Plug & Auto Setup.”
Do not connect the HDMI cable while the 
“Plug & Auto Setup” is progressing.

■ 

Progressive scan automatically activates when
HDMI is connected.

■ 

If your TV does not have Bitstream decoder,
you must set the digital audio output to PCM in
order to watch through the HDMI output.
(See pages 42~43)

■ 

Depending on the HDMI device 
(TV/HDMI Receiver) you use, audio may not be
supported. If TV/HDMI Receiver does not
support Dolby digital, Audio output is not
available when you set Digital output as
'Bitstream' in Audio setup menu. In this case,
set the digital audio output to PCM. If TV/HDMI
Receiver does not support DTS, Audio output
is not available when you play disc in DTS
format.

■ 

You can switch from the HDMI output to other
output only in stop mode.