Samsung sv-dvd540 取り扱いマニュアル

ページ / 38
12
13
GB
GB
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 11. 
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
The 
Language Set 
menu is displayed.
3
Select the required language by pressing the 
or
buttons.
4
Press OK to store the language selected.
Result:
A message appears.
5
Press OK button. 
6
Press the 
or
buttons to select your country.
The VCR searches for the stations according to a preset 
preference list corresponding to the country that you have  
selected.  
7
Press OK to start the auto scanning. 
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.   
8
The current time and date are displayed automatically. 
Check the date and time.
if it is :
Correct, Press RETURN button twice to exit the menu. 
incorrect, see page 17.
Auto preset can be performed by pressing ■ (STOP) on 
the VCR continuously for 5 seconds or more with no 
tape inserted.
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR. 
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources. 
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner. 
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the 
DVD-VCR, e.g. re-adjust to channel 39.
Satellite Receiver or other Equipment
1. AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
DVD-VCR. 
After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources. 
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner. 
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the 
DVD-VCR, e.g. re-adjust to channel 39.
Aerial
Aerial Connector
SCART Cable
RF coaxial cable
1
2
TV
Satellite Receiver or other Equipment
Aerial
Aerial Connector
SCART Cable
RF coaxial cable
1
2
TV
You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment chosen. The following illustrations give a few
examples of the connection possibilities. 
2
LINE OUT
L
R
TV
Auto setup
Please wait
00 %
 Clock Set
Auto Clock  :  On
Time            Date              Year
12 : 00         1 / JAN /    2003    WED
 00278A SV-DVD540/EUR-GB1  9/9/03 9:49 AM  Page 12