Samsung av-r700 取り扱いマニュアル
Setting DRC
(Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
22
21
Test Tone
Use test tine to check speaker connection status or defect of speaker or adjust the level.
Press
TEST TONE
button.
•
Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R
➝ S.B ➝ S.L ➝ S.W.
➝ S.B ➝ S.L ➝ S.W.
•
During test tone output, press
…† button to adjust the speaker output level
from -10 to +10 dB by 1 step.
To Stop Test Tone
•
Press
TEST TONE
button again.
√
Press and hold
SURROUND
button for about 5 seconds.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press
INPUT
button 3 times.
•
“DRC SETUP” appears on the display.
Press
SURROUND
button to set DRC.
•
Each time you press this
button, DRC : STD ➝ DRC :
MIN ➝ DRC : MAX will be
selected in turn.
To Exit Setup Mode
•
Wait for about 5 seconds or turn the
VOLUME CONTROL
of the main unit.
“SETUP MODE OFF” appears on the display and exits Setup Mode.
√
•
You cannot use test tone in 5.1CH MULTI CH function.
•
This function operates only in main unit.
•
STD
: Set DRC effect to standard.
•
MAX
: Set DRC effect to maximum.
•
MIN
: Set DRC effect to minimum.
Setting DRC
MAIN UNIT
1
2
2
3
Caution!
To Automatically Output Test Tone
REMOTE CONTROL
1
Caution!
OPERA
TION