Samsung av-r700 取り扱いマニュアル

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

• Place the rear left and right speaker at the interval of front

left and right speaker.

• If there isn't enough now, place rear speakers to face

down other.

• Place the rear speakers about 70 cm to 1 m above your

ear, facing slightly downwards.

❈ 

Unlike the front and center speakers, the rear speakers
and used to mainly sound effects and sound will not
come from them all the time. 

Rear Speakers

• If you place 1 rear center speaker, place it so that it faces

forward from the back of listener. 

• Place the rear center speaker about 70 cm to 1 m above

rear speakers, facing slightly downwards.

Rear Center Speaker

• Adjust the angle of front left and right speakers so

that it can form 30 degree to the left and right from
the listening position.

• Place the speakers so that their tweeters will be at

the same height as your ear.

• Align the front face of the front speakers with the

front face of the center speaker or place them
slightly in front of the center speaker.

Front Speakers

• It is best to install center speaker at the same height as

the front speakers.

• You can also place center speaker directly over or

under the TV.

Center Speaker

• Place AV Receiver on the dedicated stand or chest of

living room or under the TV stand properly.

Position of AV Receiver

• The position of the subwoofer is not so critical. Place it

anywhere you like.

• Usually, it is placed by a corner near the front speakers. 

Subwoofer

When you place the speaker on the wall, make sure
to fasten it tightly so that it may not fall off.

10

9

•

Never touch speaker terminals while
the power is on. Doing so could
result in electric shock.

•

Make sure the polarities (+ and -)
are correctly.

√ 

√ 

Turn and loosen the 
speaker connector. 

Press the tab of the 
speaker connector. 

Insert the black wire into the black(-)
terminal and the red wire into the
red(+) terminal.

Turn and fasten the 
speaker connector.

Insert the black wire into the black(-)
terminal and the red wire into the
red(+) terminal.