Samsung GX-20 ユーザーズマニュアル

ページ / 163
106
Using P-TTL Auto Mode
Use this fl ash mode with the SEF-36PZF or SEF-54PZF fl ash unit. When 
fl ash mode is set to [P-TTL auto], the fl ash pre-fi res right before taking pictures 
using 16-segment metering and allows more precise control. P-TTL auto mode 
is available with SEF-54PZF and SEF-36PZF models while using a wireless 
connection. 
1.  Remove the cover of the hot shoe and attach the external fl ash 
(SEF-36PZF or SEF-54PZF).
2.  Turn on the external fl ash.
3.  Using the external fl ash, P-TTL mode is automatically set to use.
4. Confi rm that the external fl ash is fully charged and then take the picture.
●  P-TTL auto is only available with the SEF-36PZF or SEF-54PZF fl ash 
unit.
●  The   will light in the viewfi nder when the fl ash is ready (fully charged).
●  For details such as operation method and effective distance, please read 
the external fl ash manual.
● The fl ash does not discharge when the subject is bright enough when 
Flash Mode is [Auto ( )] or [Auto+Red-eye (
)]. Therefore, it may not 
suitable for daylight-sync shooting.
●   Never press the fl ash pop up button( ) when any external fl ash unit is 
attached to the camera. The built-in fl ash will hit the external fl ash.
●  See the SEF-36PZF or SEF-54PZF operating manual for details.
Using High-Speed Flash Sync Mode
With the SEF-36PZF or SEF-54PZF, you can discharge the fl ash to take a 
picture at a shutter speed faster than 1/180 second. More than two external 
fl ashes are required for a wireless connection.
■  Attaching and Using the SEF-36PZF or SEF-54PZF on the Camera
1.  Remove the hot shoe cover and attach the external fl ash (SEF-36PZF or 
SEF-54PZF).
2.  Rotate the Mode dial (
) to select Tv or M.
3.  Turn on the Camera and external fl ash.
4.  Set the external fl ash sync mode to HS   (high-speed fl ash sync.).
5.  Confi rm that the external fl ash is fully charged and then take the picture.
● The   will light in the viewfi nder when the fl ash is ready (fully charged).
● High-speed fl ash sync is only available when the shutter speed is faster 
than 1/180sec.
● High-speed fl ash sync is not available when the exposure mode is set to 
B (Bulb).
●  See the SEF-36PZF or SEF-54PZF operating manual for details.
Using an External Flash (Sold Separately)