Samsung GX-20 ユーザーズマニュアル

024

For additional use of lenses, please check lenses available to be used at 
Customer Service.

 

Some functions are restricted when lenses are not set 

to Aperture A (Auto). To allow shutter release, set [Use Aperture Ring] in 
[CUSTOM2 MENU] menu.

Turn the camera off before attaching or removing the lens to prevent   

unexpected lens problems.

1.  Check that the camera is off.

2.  Remove the body mount cover (

①

) and 

lens mount cover (

②

). Be sure to put the 

lens down with the lens mount side facing 

upward to avoid damage.

3.  Align the red dots on the camera and the 

lens, and secure by turning the lens  

clockwise until it clicks. After attaching, 

check that the lens is secure. Also check 

that the red dots of the lens are on top 

and the attached portion does not move 

sideways.

4.  Remove the front lens cap by pushing the 

indicated portions inward.

5.  To detach the lens, hold down the lens 

unlock button (

③

) and turn the lens  

counterclockwise.

●  The body mount cover (

①

) is a cover to prevent damage during  

shipping.

●  We assume no responsibility nor liability for accidents, damages and 

malfunctions resulting from the use of lenses made by other manufac-

turers.

●  The camera body and lens mount incorporate lens information 

contacts and an AF coupler. Dirt, dust, or corrosion may damage the 

electrical system. Clean the contacts with a soft dry cloth.

Attaching and removing the lens must be done in a clean place. Please 

avoid contact with liquid water. If the camera’s body or the lens gets wet or 

dirty, camera malfunction may occur.