Samsung GX-20 ユーザーズマニュアル

052

You can set the remote control function in the drive mode menu. 
(sold separately) 

•    [Remote Control] : The shutter will be released immediately the shutter release  

 

  button on the remote control unit is pressed.

•   [Remote Control (3s delay)] 

:  The shutter will be released 3 seconds  

 

  after the shutter release button on the  

 

  remote control unit is pressed.

•   [Remote Control (continuous)]  :  The continuous shooting starts as soon as  

 

  you press the remote control unit.    

 

  Press the remote control unit one more  

  

time 

to 

fi nish shooting.

1.  Press the Fn button on your camera and 

then press the direction button (▲). 

- The drive mode screen appears.

2.  Press the direction buttons (◄►) to select   

 ,   or  .

- The self-timer lamp will blink to let you know 

that the camera is in remote control wait 
status.

3.  Press the OK button.

- The camera is ready to take pictures.

4.  Press the shutter release button halfway. 

- The autofocus system operates. The focus indicator ( ) appears in the    

viewfi nder when the subject is in focus.

5.  Point the remote control unit towards the 

front of the camera and press the shutter 

release button on the remote control.  

The picture is taken.

●   You cannot focus with the remote control unit in default settings. Focus 

on the subject fi rst before operating with the remote control. You can 

set [AF in Remote Control] to [On] in the [CUSTOM1 MENU] menu.

●   Turn the power off to stop the remote control operation after it has 

been activated.

●   The remote control may not operate in backlit conditions.
●  To take a picture while charging the built-in fl ash, set [Release in 

Charging] to [On] in the [CUSTOM2 MENU].

●   When using the built-in fl ash, raise the fl ash into position fi rst.

Remote Control

Drive

: Set

: Move

Single Frame Shooting

Drive

: Set

: Move