Samsung GX-20 ユーザーズマニュアル

081

You can switch to Shutter Priority automatic exposure by turning the front dial (

) in P (Hyperprogram) mode.

-   You can only set the shutter speed to a value 

that is in relation to aperture.

-   If the brightness changes and the aperture value 

is outside the relative range, the aperture will 

blink in the viewfi nder and on the LCD panel.

You can switch to Aperture Priority automatic exposure by turning the rear dial (

) in P (Hyperprogram) mode.

-  You can only set the aperture to a value that is in 

relation to shutter speed.

-   If the brightness changes and the shutter speed 

is outside the relative range, the shutter speed 

will blink in the viewfi nder and on the LCD panel.

-   Press the Green button ( ) to return to Hyper-

program automatic exposure.

●  All the program modes have different uses of the front dial (

) and 

rear dial (

) depending on the set values.

●  When using the P (Program) mode, you can change the ISO sensitivity by 

using the front dial (

) while pressing and hold the OK button.