Samsung NX10 ユーザーガイド

  Using the bulb exposure  

By using the bulb exposure, you can set the shutter 
speed as long as you want.

  Rotate the mode dial to M.

  Rotate the dial and set the shutter speed 

to Bulb.

•  Bulb exposure indication appears next to 

the shutter speed of 30"(seconds).

  To adjust the aperture value, press and 

hold the [EV] while rotating the dial.

  Align your subject in the frame and half-

press [Shutter] to focus.

  Press [Shutter] to take a photo.

•  The exposure time continues until you 

finish holding the [Shutter]. Press and 

hold the [Shutter] for desired time. As 

soon as you finish holding the [Shutter], 

the shooting is complete.

Using the Aperture Priority, Shutter Priority, or Manual mode

For the image stabilization at the time of taking 
pictures in the bulb exposure mode, it is 
recommended to use a reliable tripod or shutter 
release (purchased separately).
If you use a long shutter speed, the time taken 
to save images gets longer as well. This is not a 
problem of the product and you do not need to 
replace the battery.
When taking pictures for a long time by using the 
bulb shot function, we recommend to use the camera 
after fully charging the battery. 
When taking pictures in the mode of bulb exposure, 
noise can occur in case of long-time exposure. 
Hence, it is recommended to set the noise reduction 
function.  
The noise reduction function operates when the 
shutter speed is set longer than 4 seconds.
When using the bulb exposure function, the 
successive shooting function can not be used.
The ISO speed cannot be set to AUTO when using 
the bulb exposure function.

•

•

•

•

•

•

0173

Bulb F3.5