Samsung NX10 ユーザーガイド

Using the flash popup button  

The flash operates when the built-in flash is opened by 
using the flash button. When the flash is closed, it will 
not burst out the light and the 

, 

,  , and   

modes support automatic popup and flash light.

  In Shooting mode, press [ ].

  Align your subject in the frame and half-

press [Shutter] to focus.

  Press [Shutter] to take a photo.

•  Even in the case that the built-in flash is 

already popped out by using the 'Flash' 

button, the bursting function is not 

supported when the flash option of menu 

is set to Off.

Setting the flash option 

If a picture is taken in a dark place, the picture may 
appear to be dark since the light source is not sufficient. 
Press [ ] to pop up the flash. 

  In Shooting mode, press [MENU].

  Select Shooting 2 (

) → Flash →  

an option.

Off

The flash light doesn't operate.

Smart Flash

The amount of flash light is adjusted automatically 

according to the exposure in the surrounding environment. 

Auto

The flash light operates automatically in the dark place.

Auto+Red

The flash light operates automatically and prevents the 

red-eye effect.  

Fill in

•  Always operates the flash light.

•  The brightness of flash light is automatically controlled.

Fill-in Red

Always operates the flash light, and prevents the red-eye 

effect.

1st Curtain

Operates the flash light immediately after the opening 

of shutter

2nd Curtain

Operates the flash light just before the closing of shutter

•  The picture can be taken better if the subject is 

located within the applicable range of flash. 

(Refer to the Guide No in “Specification.”)

•  You can set the auto flash option only with the 

external flash for exclusive use by the NX-series 

model.

•  The available flash options are different 

depending on the shooting modes.

Flash button

Taking a picture in a dark place

The function can be set directly by pressing [Fn] in the shooting mode.