Samsung wb850 ユーザーガイド
Wireless network
147
About the Wake on LAN (WOL) feature
Setting the PC to turn on
1
Turn on the PC and press F2 while the PC is booting.
•
The BIOS setting menu will appear.
2
Select Advanced tab
→ Power management Setup.
3
Select Resume on PME
→ Enabled.
4
Press F10 to save your changes and continue booting.
5
Click Start, and then open the Control Panel.
6
Configure the network connection.
•
Windows 7:
Click
Click
Network and Internet
→ Network and Sharing
Center
→ Change adapter settings.
•
Windows Vista:
Click
Click
Network and Internet
→ Network and Sharing
Center
→ Manage network connections.
•
Windows XP:
Click
Click
Network and Internet Connection
→ Network
Connection.
7
Select drivers related to network adapter.
8
Click the Advanced tab, and then set the WOL menus.
•
You cannot use this feature across a firewall or if a security program
has been installed.
has been installed.
•
To turn on the PC with the WOL feature, the PC must have an active
connection to the LAN. Ensure that the indicator light on the PC’s LAN
port is on, which shows that the LAN connection is active.
connection to the LAN. Ensure that the indicator light on the PC’s LAN
port is on, which shows that the LAN connection is active.
•
Depending on your PC model, the camera may only be able to wake
the PC.
the PC.
•
Depending on your PC’s OS or drivers, the names of the WOL setting
menu may vary.
menu may vary.
- examples of setting menu names: Enable PME, Wake on LAN etc.
- examples of setting menu values: Enable, Magic packet etc.