Samsung pl-42s5 ユーザーガイド

34

1

If the television is in Standby mode, press the POWER
button on the remote control. 
The message Start Plug & Play is displayed. 
Press the ENTER button to select OK.
The Language menu is displayed.

2

Select the appropriate language by pressing the 
▲ or ▼ button. 
Press the ENTER button to confirm your choice. 
The message Check antenna input is displayed.

3

Press the ENTER button to select OK. 
The menu to select signal source is displayed.

4

Select the correct signal source (Air, STD, HRC and IRC)
by pressing the 

▲ or ▼

button, then press the 

ENTER button.

When the TV is initially powered On, basic customer settings proceed automatically and
subsequently: Setting the language, checking the antenna input, memorizing the
channels, and setting the time.

• The Plug & Play function operates after plugging in the TV for the first time.

• The Language menu will automatically appear

after several seconds, even if the ENTER button is
not pressed.

• The message Check antenna input will

automatically appear after several seconds, even
if the ENTER button is not pressed.

BN68-00866C-00Eng(032~043)  8/4/05  6:18 PM  Page 34