Omnitron iConverter 4xT1/E1 MUX/M 8831N-1-B ユーザーズマニュアル

Multiplexes four independent T1 or E1 channels from 

 

■

copper links into one fiber link

10/100/1000 copper Ethernet multiplexed with T1/E1 

 

■

circuits

Small Form Pluggable (SFP) or fixed-fiber transceivers, 

 

■

in standard and CWDM wavelengths

Supports multimode, single-mode dual fiber, single-

 

■

mode single-fiber

Remotely-managed configuration and testing enables 

 

■

rapid deployments

Management via local serial port, Telnet or SNMP

 

■

Configurable alarm relay contacts for audio/visual fault 

 

■

notification

Supports local and remote fiber and copper loop-back 

 

■

modes

Commercial (0 to 50º C) and wide (-40 to 60º C) 

 

■

operating temperature ranges

Lifetime Warranty and free 24/7 Technical Support

 

■

The  iConverter  4xT1/E1  MUX/M  multiplexes  up  to  four  

T1/E1s  and  Ethernet  onto  a  fiber  optic  transport  link,  and 

features  remotely  managed  testing  and  configuration 

capabilities.

The iConverter 4xT1/E1 MUX/M operates in a back-to-back 

configuration, with one multiplexer at each end of the fiber 

transport link. The 4xT1/E1 MUX/M can be used in applications 

where services from legacy TDM equipment require transport 

across long distances that exceed the reach or capacity of 

copper. This includes applications such as T1/E1 extension, 

mobile  backhaul  and  building-to-building  PBX  connectivity, 

making it ideal for Enterprise, Telecom and Utility industries.

The  4xT1/E1  MUX/M  supports  fixed-fiber  and  Small  Form 

Pluggable (SFP) transceivers, enabling easy adaptability to 

different fiber types, distances and wavelengths. The 4xT1/

E1  MUX/M  supports  multimode,  single-mode,  single-mode 

single-fiber, in standard and CWDM wavelengths.

The  copper  interfaces  feature  four  RJ-48  connectors  for 

balanced T1/E1  applications.   An  optional  adapter  cable  is 

available to convert each RJ-48 interface to a BNC interface 

for unbalanced E1 transport applications.

The  4xT1/E1  MUX/M  supports AMI,  B8ZS  and  HDB3  line 

codes.  DIP-switches provide easy configuration of the T1/E1 

line codes and line build-out.

The 4xT1/E1 MUX/M features user-selectable local loop-back 

on both the copper and fiber ports, remote fiber loop-back and 

circuit test modes.  These functions facilitate diagnosis of the 

remote unit, and minimizes the need for test equipment and 

support personnel at each end of a link.  Alarm relay and LEDs 

provide fault notification for loss of power, LOS and  AIS.

Configuration of T1/E1 line codes, line build out, loopbacks 

and circuit test is accomplished via local serial port, Telnet, 

SNMP or DIP-switches.

The 4xT1/E1 MUX/M is a compact, managed standalone unit 

available in both AC and DC models.  The AC model accepts 

AC power input ranging from 100VAC to 240VAC, 50/60Hz, 

while the DC model accepts 18VDC to 60VDC.

SFP not included