Samsung tx-n2668 ユーザーガイド
Y
O U R
N
E W
T V
8
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are three sets of input jacks, you can connect three different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
continuously, such as a VCR or a DVD player.
Because there are three sets of input jacks, you can connect three different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 11 – 19.
Œ AUDIO-VIDEO MONITOR
OUTPUT jacks
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a recording
VCR.)
signals being displayed on the big screen.
(Typically used as the input signals for a recording
VCR.)
´,Ø VIDEO/AUDIO INPUT jacks
Video and Audio signals from VCRs, DVD players
and similar devices.
Note: The common jack of component 1 and AV2,
component 2 and AV3 input jacks are exclusive
relation with each other.
and similar devices.
Note: The common jack of component 1 and AV2,
component 2 and AV3 input jacks are exclusive
relation with each other.
ˇ SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD
player.
player.
Note: In S-Video mode, Audio Output depends
what kind of audio input source is connected to
the side audio input jacks (AV1).
what kind of audio input source is connected to
the side audio input jacks (AV1).
¨ VHF/UHF
Connect to an antenna or to a cable TV system.
ˆ COMPONENT 1, 2 INPUT
jacks (480i/480p/1080i)
Connect to the audio and component output jacks
of a DVD player or Set-Top Box.
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
of a DVD player or Set-Top Box.
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.