Infocus in2124 ユーザーガイド

31

Controlling the projector remotely through a web browser

Once you have the correct IP address for the projector and the projector is on or in standby 

mode, you can use any computer that is on the same local area network to control the 

projector.

• If you are using Microsoft Internet Explorer, make sure it is version 7.0 or 

higher.

• The screen shots in this manual are for reference only, and may differ 

depending on your browser.

1

Enter the address of the projector in the address bar of your browser and 
press Enter. 

2

The main page of the Network Control displays.

•

Accessing the Network Settings or the Email Alert page requires an 
Administrator password. The default password is "0000".

3

This page allows you to make adjustments to the AMX and SNMP settings. In 
the AMX Device Discovery field, when ON is selected, the projector can be 
detected by AMX controllers connected to the same network. For details 
about AMX Device Discovery, visit the AMX website at 

http://www.amx.com

.

4

If your projector is connected to a network which supports Simple Mail 
Transfer Protocol (SMTP), you can configure it to alert you via email about 
significant events.

5

The Crestron (e-Control) page displays the Crestron e-Control user 
interface. See the next page for details.

Please pay attention to the input length and character limitations (including character and 

punctuation restrictions) listed blow:

Network Settings

Network

DHCP/Manual

(N/A)

IP Address

XXX.XXX.XXX.XXX

Subnet Mask

XXX.XXX.XXX.XXX

Gateway

XXX.XXX.XXX.XXX

DNS Server

XXX.XXX.XXX.XXX

AMX device discovery 

(N/A)

Password

Administrator (N/A)

New Password 

4

Confirm Password 

4

SNMP

SysLocation

 22

SysName

 22

SysContact

 22