Janam xp30 ユーザーガイド

 

 

 

           

14-3 

Janam Technologies LLC

 

Parameter Specification 
R&TTE 
 
 
 
 
 
Australia 

EN 300 328 v1.6.1 (2004-11) 
EN 301 489-1 v1.6.1 (2005-09) 
EN 301 489-17 v1.2.1 (2002-08)  
EN 60950-1:2001+A11 
EN 50371:2002 
AS/NZS CISPR 22:2004 

 
This product is marked with 

in accordance with the Class II product requirements specified in the 

R&TTE Directive, 1005/5/EC. The equipment is intended for use throughout the European Community. Its 
authorization for use in France is restricted as follows. 

 
 

PAN European Frequency Range: 2.402-2.480 GHz 
Restrictions in France:  
Indoor use:  

Maximum power (EIRP*) of 100 mW for the 2400-2483.5 MHz band.  

Outdoor use: 

Maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and maximum 
power (EIRP*) of 10 mW for the 2454-2483 MHz band. 

 
Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires 
devices to operate properly in an EM Field with strength of 3V/m over a frequency range of 26 to 
1000MHz. 
 
The maximum allowable field strength emitted by the XP20 is 0.3V/m according to Subpart B of Part 1 of 
the FCC rules. Therefore, the XP Series has no effect on medical devices that meet the IEC specification. 
 
Microwaves.  The radio in the XP Series terminal operates on the same frequency band as a microwave 
oven. Therefore, if you use a microwave within range of the XP20 you may notice performance 
degradation in your wireless network. However, both your microwave and your wireless network will 
continue to function. The XP Series batch devices do not contain a radio, and therefore, are not affected 
by microwave ovens. 

 

 
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free 
cloth. The terminal can be cleaned with a damp cloth. 

 

 
Janam Technologies complies with Directive 2002/69/EC of THE EUROPEAN PARLIAMENT AND OF THE 
COUNCIL OF 27 January 2003 on waste electrical and electronic equipment (WEEE). 

 

 
This product has required the extraction and use of natural resources for its production. It may contain 
hazardous substances that could impact health and the environment if not properly disposed. 
 
In order to avoid the dissemination of those substances in our environment and to diminish the pressure 
on the natural resources, we encourage you to use the appropriate take-back systems for product 
disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a 
sound way.