Infocus IN24 参照ガイド

: Presets are provided that optimize the projector for displaying 

computer presentations, film images, and video images. Film input is mate-
rial originally captured on a film camera, like a movie; video input is mate-
rial originally captured on a video camera, like a TV show or sporting event.

There are also user-definable presets. To set a preset for the current source, 
adjust the image, select Save Settings in the Presets menu, then select Save 
User 1 (or 2 or 3). You can recall these settings in the future by selecting the 
User 1 preset. If you select User Presets then further adjust the image, Pre-
sets Off will automatically be selected in the Preset menu to indicate 
changes have been made. 

To restore the factory default settings, choose Factory Reset in the Set-
tings>Service

 menu (page 33).

The following four (4) options are for progressive and computer sources. 

: adjusts the horizontal phase of a computer source.

: adjusts the vertical scan of a computer source.

: adjusts the position of a computer source.

: (progressive signals only) If a hardware device, 

such as a DVD player, is not syncing properly with the projector, select this 
option to help it to sync when connected to the projector. 

: (video sources only) increases the brightness of whites that 

are near 100%.

: removes noise around the video image.

Presets

Save
User 
Settings

Advanced menu