Infocus in3114 参照ガイド

PIN Protect

: The PIN (personal identification number) feature allows you to

password protect your projector. Once you enable the PIN feature, you

must enter the PIN before you can project an image. The default PIN on this

projector is Menu-Up-Down-Select-Source. Use the navigation buttons on the

remote or keypad to enter the correct 5-button press sequence. When all 5

numbers are entered correctly, press the Select button on the remote or

keypad to select OK. If the message “Wrong PIN” appears, verify the code

and re-enter it. If you mis-enter a number, you must enter 5 numbers and

press the Select button in order to access the “Wrong PIN” message and re-

enter the code.

To enter the PIN at projector startup:

Power up the projector. The “Enter PIN” dialog box appears after the

startup screen. Enter the PIN. Use the navigation buttons on the remote or

keypad to enter the correct button press sequence. See the description above

for instructions.

To change the PIN:

Select “Change PIN...” in the Setup menu. Enter the existing PIN. Enter the

new PIN. You can navigate between OK and Cancel by pressing the arrow

buttons on the keypad. Select OK or Cancel by pressing the Select button.

Verify the new PIN.

If you lose or forget your custom PIN:

Contact InFocus support at www.infocus.com/support.

Serial Port, Baud Rate

: Selects the serial port and baud rate.

Serial Port Echo

: Controls whether the serial port echoes characters.

Setup menu