Infocus IN3102 ユーザーガイド

No video cables are provided with the projector. You can order cables from 

InFocus or provide your own.

Plug the composite video cable’s yellow connector into the video-out 

connector on the video device. Plug the other yellow connector into the 

yellow Video 3 connector on the projector.
Plug the white connector of a Mini-plug audio Y-cable into the left audio 

out connector on the video device and plug the red connector into the right 

audio out connector on the video device. Plug the other end of the cable into 

the Audio In Video connector on the projector.
Keep in mind that video output from composite connections is not as high 

quality as S-video.

HDMI is a standard, uncompressed, all-digital audio/video interface. 

HDMI provides an interface between sources, such as set-top boxes, DVD 

players, and receivers and your projector. Plug an HDMI cable into the 

video-out connector on the video device and into the HDMI connector on 

the projector.
To take advantage of HDMI 1.3 Deep Color (30 bit) you must have a 1.3-

compatible source.

If your video device uses a round, four-prong S-video connector, plug an S-

video cable into the S-video connector on your video device and into the 

 connector on the projector. Use the audio cable as described above.

Keep in mind that S-video delivers higher quality video output than 

composite.

If your video device has a 15-pin VGA output, plug one end of the included 

computer cable into the VGA connector on your video source. This 

connector may be labeled “To Monitor” on the video source. Plug the 

computer cable into the Computer 3 or Computer 2 connector on the 

projector.

If your HD video device has component connectors, an optional 

Component to VESA adapter can be used. Plug the component cable into 

the video device. Plug the other end of the component cable into the adapter 

and plug the adapter into the Computer 3 or Computer 2 connector. 

Component offers the highest quality video output.