Infocus IN3102 ユーザーガイド

The remote uses two (2) provided AA batteries. They are easily installed by 

removing the cover from the remote’s back, aligning the + and - ends of the 

batteries, sliding them into place, and then replacing the cover.
Caution

: When replacing the batteries, be aware that using batteries other 

than the type provided with the projector may risk severe damage to the 

remote. When disposing of the batteries, be sure to do so in an 

environmentally proper manner.
To operate, point the remote at the front of the projector (not at the 

computer). The range of optimum operation is about 15 feet (4.5m).
Press the remote’s Power button to turn the projector on and off (see 

page 14 for shutdown info).
Press the remote’s Menu button to open the projector’s menu system. Use 

the arrow buttons to navigate, and the Select button to select features and 

adjust values in the menus. See page 27 for more info on the menus.
The remote also has a Source button to switch between sources.
The remote also has:
•

 buttons to adjust the sound.

•

 button that can be assigned to a special function, like Blank 

Screen or Freeze (see page 30).

•

 button to switch between sources.

•

 button to blank the screen.

•

 button to select stored settings (see page 28).

•

 button to silence the audio.

•

 button to resynch the projector to the source

•

 button to switch among aspect ratios (see page 28).

Troubleshooting the remote
•

Make sure the batteries are installed in the proper orientation and are 

not dead.

•

Make sure you’re pointing the remote at the projector or the screen, not 

the computer, and are within the remote range of 15 feet (4.5m). For 

best results, point the remote at the projector.

navigation 
buttons