Infocus IN3102 ユーザーガイド

: allows you to select a language for the onscreen display.

: turns the key click sound on or off. When this setting is on, 

pressing keys on the keypad causes the projector’s speaker to play a “click” 

sound.
Custom Key

: allows you to assign a different function to the Custom 

button, allowing you to quickly and easily use the effect. Highlight an effect 

and press Select to choose a different one.
•

: the default action. Shows the Source Info menu.

•

: Shows the Projector Info menu.

•

: toggles among 4:3, 16:9, and Native (see page 12 and 

page 28).

•

: resets the projector to the source (page 24).

•

: removes noise around the image.

•

: displays an empty screen.

•

: pauses the projected image.

•

: turns off all sound.

•

: cycles through available sources.

: When this feature is on, the projector automatically turns on 

when electrical power is connected. This allows control of ceiling mounted 

projectors with a wall power switch.
Auto Off Time

: automatically turns the projector off after no signals are 

detected for a preset number of minutes. If an active signal is received 

before the projector powers down, the image will be displayed.
Screen Save Time

: automatically blanks the screen with a black color after 

no signals are detected for a preset number of minutes. The image returns 

when an active source is detected or a remote or keypad button is pressed.
Lamp Low Power

: toggles between on and off. Turn it on to lower the light 

output of the lamp. This also lowers the fan speed, making the projector 

quieter.
Power Sounds

: controls whether the projector makes a sound when 

powered on and off.

: When this feature is On, the projector automatically finds the 

active source, checking the selected Power-up Source first. When this 

feature is Off, the projector defaults to the source selected in Power-up 

Source. To display another source, you must manually select one by 

pressing the Source button on the remote or keypad.

: determines which source the projector checks first for 

active video during power-up.
HDMI DDC

: When this feature is set to On, the projector will support an 

older DVD player for HDMI port.
Video Standard

: When this feature is set to Auto, the projector attempts to 

automatically pick the video standard based on the input signal it receives. 

(The video standard options may vary depending on your region of the 

world.) If the projector is unable to detect the correct standard, the colors 

may not look right or the image may appear “torn.” If this happens, 

manually select a video standard by selecting NTSC, PAL, or SECAM from 

the Video Standard menu.
Closed Captions

: controls closed caption display while audio is not muted. 

If this setting is not off, and audio is not muted, and the source is NTSC and 

contains captions on the selected channel, then the projector must display 

caption text overlaid on the image.
Ceiling Mount

: turns the image upside down for ceiling-mounted 

projection.

Setup menu