Infocus IN5102 ユーザーガイド

ページ / 51
4
Important Operating Considerations for Safety
Place the projector in a horizontal position no greater than 8 degrees off 
axis.
Locate the projector in a well-ventilated area without any obstructions 
to intake or exhaust vents. Do not place the projector on a tablecloth or 
other soft covering that may block the vents. 
Locate the projector at least 4' (1.2 m) away from any heating or cooling 
vents.
Use only approved ceiling mounts.
Warning
:
 To prevent eye injury if the projector is ceiling mounted, 
wear protective eyewear before opening lamp door. A warning sticker 
is included with the user documentation. Place this sticker on the lamp 
door if the projector is mounted on the ceiling.
Only genuine InFocus lamps are tested for use in this projector. InFocus 
is not liable for the performance, safety or certification of any other 
lamps. The use of other lamps violates the projector warranty and 
voids all certification marks on this projector.
Use only the power cord provided. A surge-protected power strip is 
recommended.
Refer to this manual for proper startup and shutdown procedures.
Hg – Lamp contains mercury. Manage in accordance with local 
disposal laws. See www.lamprecycle.org.
In the unlikely event of a lamp rupture, particles may exit through the 
projector vents. When the projector is turned on, keep people, food, 
and drinks out of the "keep out" area under and around the projector, as 
indicated by the "X" areas.
Follow these instructions to help ensure image quality and lamp life over 
the life of the projector. Failure to follow these instructions may affect the 
warranty. For complete details of the warranty, see the Warranty booklet.
5’
/ 1
.5 m
8’ / 2.4 m
2’ / 0.6 m
3’ / 1 m