Infocus XS1 参照ガイド

Connection

19

Examine your Video source device to determine if it has a set of unused 

Component Video output sockets available: 

•

If so, you can continue with this procedure.

•

If not, you will need to reassess which method you can use to connect to the 
device.

1.

Take a Component Video to VGA (D-Sub) adaptor cable and connect the end 
with 3 RCA type connectors to the Component Video output sockets of the 
Video source device. Match the color of the plugs to the color of the sockets; 
green to green, blue to blue; and red to red.

2.

Connect the other end of the Component Video to VGA (D-Sub) adaptor cable 
(with a D-Sub type connector) to the D-SUB/COMP. IN socket on the 
projector.

3.

If you wish to make use the projector (mixed mono) speaker, take a suitable 
audio cable and connect one end of the cable to the audio output sockets of 
the video device, and the other end to the AUDIO socket of the projector.
Once connected, the audio can be controlled by the projector On-Screen 
Display (OSD) menus. See 

 for details.

The final connection path should be like that shown in the following diagram:

AV device