Infocus XS1 参照ガイド

Operation

29

The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster 

foot. These adjusters change the image height and projection angle. To adjust the 

projector:

1.

Press the quick-release button and lift the 
front of the projector. Once the image is 
positioned where you want it, release the 
quick-release button to lock the foot in 
position.

2.

Screw the rear adjuster foot to fine tune the 
horizontal angle.

To retract the foot, hold up the projector while 

pressing the quick-release button, then slowly 

lower the projector. Screw the rear adjuster foot 

in a reverse direction.

If the projector is not placed on a flat surface or 

the screen and the projector are not 

perpendicular to each other, the projected image 

becomes trapezoidal. To correct this situation, 

see 

 for details.

In some cases, you may need to optimize the 

picture quality. To do this, press AUTO on the 

projector or remote control. Within 3 seconds, 

the built-in Intelligent Auto Adjustment function 

will re-adjust the values of Frequency and Clock 

to provide the best picture quality. 

The current source information will be displayed 

in the corner of the screen for 3 seconds. 

If needed, sharpen the picture by rotating the 

focus ring.