Infocus XS1 参照ガイド

Operation

35

According to the detected signal type, there are some user-definable functions 

available when User 1 or User 2 is selected. You can make adjustments to these 

functions based on your needs.

Highlight Brightness in the PICTURE menu and 
adjust the values by pressing 

/

 on the 

projector or remote control.

The higher the value, the brighter the image. And 

lower the setting, darker the image. Adjust this 

control so the black areas of the image appear 

just as black and that detail in the dark areas is 

visible.

Highlight Contrast in the PICTURE menu and 
adjust the values by pressing 

/

 on the 

projector or remote control.

The higher the value, the greater the contrast. 

Use this to set the peak white level after you have 

previously adjusted the Brightness setting to suit 

your selected input and viewing environment.

Highlight Color in the PICTURE menu and adjust the values by pressing 

/

 on 

the projector or remote control.

Lower setting produces less saturated colors; setting to the minimum value makes 

the image black and white. If the setting is too high, colors on the image will be 

overpowering, which makes the image unrealistic.

Highlight Tint in the PICTURE menu and adjust the values by pressing 

/

 on 

the projector or remote control.

The higher the value, the more reddish the picture becomes. The lower the value, 

the more greenish the picture becomes.

Highlight Sharpness in the PICTURE menu and adjust the values by pressing 

/ 

 on the projector or remote control.

The higher the value, the sharper the picture becomes. The lower the value, the 

softer the picture becomes.

+50

+30

+70

+50

+30

+70