Infocus LP240 ハードウェアマニュアル

Loosen the three captive screws that fasten the lamp module to the projector. Then lift the 

module out of the projector using the built in handle. 

 

 

♦ 

 If you install a new lamp, you need to reset the lamp counter. 

a.  Turn the projector on, then press Menu on the remote control or the keypad. 
b.  In the Main menu, select Settings. 
c.  In the Settings menu, select Service. 
d.  In the Service menu, select Lamp Reset. 

The lamp timer resets itself to zero. 

e.  To verify that the lamp timer is reset, select About on the Main menu. The lamp hours are 

listed in the About box.