Infocus LP70+ ユーザーガイド
5
SETTING UP THE PROJECTOR
1
Place the projector on a flat surface.
•
The projector must be within 6 feet (1.8 m) of your power
source and your computer.
source and your computer.
•
If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear” on page 24
to reverse the image.
up the projector behind your screen. See “Rear” on page 24
to reverse the image.
2
Position the projector the desired distance from the screen.
NOTE: The projector must be at
least 4.9 feet (1.5 m) from the
projection screen.
•
If the image is too big or too small, use the zoom ring to
adjust the size or move the projector forward or backward.
Figure 5 shows three projected image sizes. For more infor-
mation about image size, see “Projected Image Size” on
page 38.
adjust the size or move the projector forward or backward.
Figure 5 shows three projected image sizes. For more infor-
mation about image size, see “Projected Image Size” on
page 38.
F
IGURE
5
Projected image size
3
Make sure the projector and the computer are turned off.
3.
3
ft.
/1
m
22
.2
ft
./
6.
7
ft/
4.9 ft./
9.9 ft./
33 ft./
10m
10m
6.
8m
2m
3m
1.5m
LP70.book Page 5 Friday, February 13, 2004 7:39 AM