Infocus LP70+ ユーザーガイド
31
F
IGURE
25
Inserting the screwdriver into the lamp housing tab
5
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
environmentally proper manner.
WARNING: Do not drop the
lamp module or touch the glass
bulb! The glass may shatter and
cause injury.
F
IGURE
26
Removing the lamp housing
6
Install the new lamp housing. Be careful to attach the connec-
tor on the lamp housing to the connector inside the projector.
These connectors are located near the leveling foot.
tor on the lamp housing to the connector inside the projector.
These connectors are located near the leveling foot.
7
Tighten all three screws.
8
Plug in the power cord, then press the
Power
button to turn
the projector back on.
9
To reset the lamp hour timer, navigate to the Setup/Service
menu and choose Reset lamptimer. See page 26 for details on
the Service menu.
menu and choose Reset lamptimer. See page 26 for details on
the Service menu.
tab
LP70.book Page 31 Friday, February 13, 2004 7:39 AM