Infocus LP770 参照ガイド

ページ / 61
10
S
e
t
t
i
n
g
 
u
p
 
t
h
e
 
P
r
o
j
e
c
t
o
r
Connecting a Video Player
The LP770 has 3 different connections for video players: S-video, 
composite video, and BNC (the S-video and BNC connections 
require cables not included with the LP770). 
1
If your video player uses a round, one-prong composite video 
connector, plug the composite video cable’s yellow connector 
into the “video-out” connector on your video player. This con-
nector may be labeled “To Monitor.” If you’re using an S-
video cable, connect it to the “S-video out” connector on the 
video player. If you’re using a BNC cable, connect it to the 
“BNC-video out” connector on the video player (Figure 9).
CAUTION: Your video player
may also have a “Video Out”
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.
2
Plug the other yellow connector into the 
Video 2 In 
composite 
video connector on the projector. If you’re using S-video, plug 
the other end of the cable into the 
Video 1 or 2 In 
“S-video” 
connector on the projector. If you’re using BNC, plug the other 
end of the cable into the 
Video 1 In 
“BNC” connector on the 
projector.
F
IGURE
 9
Connecting the projector to a video player 
3
Plug the audio cable’s white connector into the left “audio 
out” connector on your video player. Plug the cable’s red con-
nector into the right “audio out” connector on the video 
player.