Infocus lp925 参照ガイド

Indicates how many hours the current lamp has been in use. The 
counter starts at zero hours and counts each hour the lamp is in 
use. After 1,900 hours, the message “Change Lamp” temporarily 
appears on the screen when the projector is turned on. Change 
the bulb when the brightness is no longer acceptable. See 
“Replacing the Projection Lamp” on page 35 for details.

Shows your computer’s resolution setting. To change this, go to 
your computer’s Control Panel and adjust the resolution in the 
Display tab. See your computer’s user’s guide for details.

The time period that one horizontal line is displayed.

The time period that one video frame is displayed.

Indicates if the audio is muted. Mute is only available on the 
optional remote.

Indicates the active source: Computer RGBHV, Computer VESA, 
Computer M1 Analog or Computer M1 Digital, Computer 
CableWizard, Component Video, Composite Video, or S-Video.

Indicates if external speakers are connected.

Indicates the projector’s software version. This information is 
useful when contacting Technical Support.

Indicates the projector’s startup screen version. This information 
is useful when contacting Technical Support.

Indicates the projector’s boot software version. This information 
is useful when contacting Technical Support.

Indicates the CableWizard’s software version. This information is 
useful when contacting Technical Support.